Videos
DTIs and Squirter® DTIs for Engineers
Can't see youtube content? Click here
- Downloads
- Videos
- DTIs and Squirter® DTIs for Engineers
- DTIs and Squirter® DTIs for Inspectors
- DTI and Squirter® DTI definitions
- Torque Isn't Tension
- Squirter® DTI calibration
- NEW: Preinstallation Verification Test
- NEW: Job Inspection Gap
- NEW: Bolt Assembly Nut Side
- NEW: Bolt Assembly Head Side
- Can't Squash the Bumps? Dry or Rusty Bolts
- Squirter® DTIs and Oversized Holes
- Squirter® DTIs in Cold Weather Conditions
- NEW: Hot Dip and Mechanically Galvanized Fasteners
- .DXF / .DWG's for Detailers
- FAQs (Squirter® DTIs)
- FAQs (Standard DTIs)
- Flat Washer Chart
- Bolting Articles
- Bolting Methods
- Quality Assurance
- Manufacturing Specs
- Application Specs
- Cost Analysis
- University Studies and Independent Research
- Roadmap to Applied Bolting Certs
Squirter DTI's & Squirters DTI are Registered Trademarks of Applied Bolting Technology Products, Inc.
1413 Rockingham Road Bellows Falls, Vermont, USA 05101
1413 Rockingham Road Bellows Falls, Vermont, USA 05101
©2012 Applied Bolting Technology
site by integritive web design, asheville
site by integritive web design, asheville
