• Company

  • Who We Are

  • News

  • Events

  • Distributors

  • Careers

• Products

  • Squirter® DTIs

  • Cost Analysis
  • Why Use Squirter® DTIs
  • Who's Using Squirter® DTIs
  • Squirter® DTI Testimonials

  • Standard DTIs

  • Standard® DTI Testimonials

  • Wind Squirter® DTIs

  • Special DTIs

  • DTI Sandwiches
  • Squirter® DTIs for Pipe Flange Bolting

  • Lubricants

  • Wrenches

  • How To Buy / Distributors

  • Line Card

  • Specifications

  • Bolt Tension Chart
  • Application Specifications
  • Manufacturing Specifications
• Field Support

  • Training

  • Quality Assurance

  • Service & Field Support Testimonials

  • Warranty, Patents and Trademark

  • Tell us about your Job

• Projects & Applications

  • Wind Power

  • Bridges

  • Power Plants

  • Commercial

  • Sports Facilities

  • Industrial and Process

  • Scrubbers and Precipitators

  • Original Equipment

  • Special Projects

• Bolting Resources

  • FAQs (Squirter® DTIs)

  • FAQs (Standard DTIs)

  • Flat Washer Chart

  • Quality Assurance

  • Manufacturing Specs

  • Application Specs

  • Roadmap to Applied Bolting Certs

  • Cost Analysis

  • Downloads

  • View All Downloads
  • Trial Projects
  • Articles
  • Install/Inspect Instructions
  • .dxf/.dwg's for Detailers
  • PowerPoint
  • Spanish Instructions
  • Videos
  • Torque / Wrench Capacity Chart
  • Flat Washer Chart
  • SS-39D Orange Silicone MSDS
  • RTV 200-185 Orange Silicone MSDS
  • Our Brochure

  • Videos

  • DTIs and Squirter® DTIs for Engineers
  • DTIs and Squirter® DTIs for Inspectors
  • DTI and Squirter® DTI definitions
  • Torque Isn't Tension
  • Squirter® DTI calibration
  • NEW: Preinstallation Verification Test
  • NEW: Job Inspection Gap
  • NEW: Bolt Assembly Nut Side
  • NEW: Bolt Assembly Head Side
  • Can't Squash the Bumps? Dry or Rusty Bolts
  • Squirter® DTIs and Oversized Holes
  • Squirter® DTIs in Cold Weather Conditions
  • NEW: Hot Dip and Mechanically Galvanized Fasteners

  • Bolting Articles

  • Bolt and DTI Coating
  • Torque and Tension
  • Squirter® DTIs
  • DTIs
  • Interactive 3D Technology
  • Wind Power
  • Various Bolting Articles

  • Bolting Methods

  • Calibrated Wrench
  • Direct Tension Indicator
  • Turn of Nut (Part Turn)
  • Twist-Off Bolts

  • University Studies and Independent Research

• Installation & Inspection

  • Installing Squirter® DTIs

  • Installing Standard DTIs

  • Installing Windpower Squirter DTIs

  • Spanish Instructions

  • Chinese Instructions

  • Training Videos

  • Application Advisories

  • 1 1/4" Dia. A490 Bolts in oversized holes
  • SQUIRTER® DTIs and oversized holes
  • Oversized Holes: Flat Washer Chart
  • Hot Dip Galvanized Flat Washers
  • Using Nut End Installation with 1 1/4" diameter or Larger DTI's
  • Weathering Steel DTI's on Bridges
  • Skidmore MZ Plate Bore for A490 DTIs

  • Bolting Methods

  • Calibrated Wrench
  • Direct Tension Indicator
  • Turn of Nut (Part Turn)
  • Twist-Off Bolts

  • All the Details (the fine print)

  • Short Form DTI Install

Polishing or grinding of the DTI bumps

1. You find the bolt "rolls" or turns in the hole while you ar tightening and you're not sure whether that's OK. See rolling bolts
   
   
2. Can DTI's be installed from one side, with only one man? See one side - one man installation

• COMPANY
• PRODUCTS
• FIELD SUPPORT
• PROJECTS & APPLICATIONS
• BOLTING RESOURCES
• INSTALLATION & INSPECTION