DOWNLOADS

— Articles Discussing Interactive Technology

Download

"Emailing Interactive 3-D Bolting Pictures Makes for Better Constructability"

— Articles Discussing Bolt Coating

	Download	Bolt Coating Thickness and Nut Overtapping— A Lesson in Practical Necessity
	Download	Coated Bolts Can Improve Constructability

— Articles Discussing Torque and Tension

Download

Lessons From the Field— Lesson 1: A Torqued Bolt Isn't Necessarily a Tight Bolt

— Articles About Squirter DTIs

	Download	Squirters: Technology For a Modern World
	Download	Squirter DTIs Solve Suspension Pivot Bolt Problems
	Download	M36 Euro Squirter DTIs- Cheaper, Better Than Torque
	Download	Leave Your Feeler Gage at Home
	Download	Tests Show Squirter DTIs are Amazingly Accurate
	Download	Squirter DTIs make SCR & HRSG Bolting Easy
	Download	Squirter DTIs Trial Project by Florida DOT
	Download	Florida Finds Squirter DTIs to Die For
	Download	Squirter DTIs Blind Tested at University of Idaho

— Articles about DTI's use & specification

	Download	You Can't Tension All Bolts
	Download	Bolting Failures I Have Seen
	Download	Finally, A New Research Council Spec
	Download	If You Can't Buy U.S. Structural Bolts
	Download	Specification Conformance and Product Usability
	Download	Anticorrosion Coatings for Bolts and DTI's
	Download	DTI's mean less Bolt Relaxation, Creep
	Download	DTI's Do More, Often, for Less
	Download	Bolts Should Stretch and Occasionally Fracture, Never Strip
	Download	Big New Jersey Sign Bolt Failure Analyzed
	Download	Why Pre-certified Structural Bolt Sets & DTIs Dramatically Improve Bolting Constructability
	Download	Preseone Los Bordes - "Squash the Bumps"
	Download	The Yielding of Fasteners During Tightening
	Download	The Effects of Over-Compressing ASTM F959 Direct Tension Indicators on A325 Bolts Used in Shear Connections

— Articles about "Tension Control" Bolts

Download

"Tension Control Bolts: Strength and Installation"

— Powerpoint: Squirter for M36 DIN 6914 bolts

See a brief powerpoint presentation on our development of a custom Squirter for the M36 DIN 6914 bolts used in many wind turbine shafts
Download Presentation (14MB)
(Self-Running PowerPoint...PowerPoint not needed)
(To Download: Right Click > Save target as)

— Applied Bolting Technology Brochure

— Installation and Inspection Instructions

	DTI Installation	Download: 61K
	Here's what you do ... Snug the plies Compress the DTI Insert feeler gage Go home.
	Squirter DTIs Calibration, Installation & Inspection Sheet	Download: 33K
	1. Calibrate in a skidmore 2. Snug the array of bolts 3. Drive them till they squirt 4.Go home
	Short Form: DTI Installation & Inspection Sheet	Download: 200K
	Short Form: Chinese Language File	Download: 161K

— eDrawings

AGDII Standard DTI
download eDrawing
(2.6M .exe)

AGDII Double DTI
download eDrawing
(2.6M .exe)

1" A490 DTI

1. 1" A490 DTI: Oversized slotted Hole Both Faces, DTI under Bolt head
download eDrawing
(2.5M .exe)

2. 1" A490 DTI: Short Slots Both Faces, DTI under Nut End
download eDrawing
(2.6M .exe)

1 1/8" A490 DTI

1. 1 1/8" A490 DTI: STD Hole Both Faces DTI Nut End
download eDrawing
(2.5M .exe)

2. 1 1/8" A490 DTI: Oversized slotted Hole Both Faces, DTI under Bolt head
download eDrawing
(2.5M .exe)

3. 1 1/8" A490 DTI: Short Slots Both Faces-DTI under Nut End
download eDrawing
(2.6M .exe)

1 1/4" A490 DTI

1. 1 1/4" A490 DTI: STD Hole Both Faces DTI Nut End
download eDrawing
(2.5M .exe)

2. 1 1/4" A490 DTI: Oversized slotted Hole Both Faces, DTI under Bolt head
download eDrawing
(2.5M .exe)

3. 1 1/4" A490 DTI: Short Slots Both Faces, DTI under Nut End
download eDrawing
(2.6M .exe)

1 1/2" A490 DTI

1. 1 1/2" A490 DTI Short Slots Both Faces, DTI under Nut End
download eDrawing
(2.6M .exe)


7/8" A325 DTI

1. 7/8" A325 DTI: STD Hole Both Faces DTI Nut End
download eDrawing
(2.5M .exe)

2. 7/8" A325 DTI: Oversized slotted Hole Both Faces, DTI under Bolt head
download eDrawing
(2.5M .exe)

3. 7/8" A325 DTI: Short Slots Both Faces, DTI under Nut End
download eDrawing
(2.6M .exe)

• Following are AutoCAD files for Structural Steel Detailers you can put them on your project drawings, then annotate them a little, which then tells bidders of that project to expect DTI's on the bolts and how to install them

Download the files: Click on the file name with your Right mouse button and choose Save Target As or Save Link As

2 Drawings showing installation by turning the bolt head to tighten the bolt dwg file or dxf file

These files will not open in your browser, you must save these files to your local hard drive and then view them with a program that supports DWG or DXF file formats.

• Following are AutoCAD files for Structural Steel Detailers you can put them on your project drawings, then annotate them a little, which then tells bidders of that project to expect DTI's on the bolts and how to install them

Download the files: Click on the file name with your Right mouse button and choose Save Target As or Save Link As

2 Drawings showing installation by turning the nut to tighten the bolt dwg file or dxf file

— Spanish Instructions

¡Baje aquí as instrucciones
de instalación de IDTs en formato PDF!

¡Haga clic aquí para descargar las instrucciones de instalación y calibración de los IDTs por chisguete en formato pdf!

— Videos

— Product Line Card

— Recommended Wrench Capacity and Make:

View Chart

Download and Print Torque Chart (.pdf)

— MSDS - SS-39D Orange Silicone RTV Lower Viscosity

— Flat Washer Chart

DOWNLOADS